Sublimation Mug Press Settings: Temperature, Time and How to Fix Common Problems

Most sublimation problems on mugs come down to three things: heat, time and moisture. Below are the settings we recommend for our own 11oz sublimation blanks, and what to change when a print does not come out right. We have made sublimation coated mugs since 2003.

HongDa 11oz sublimation mug blank No. 7102 with measuring scale
Our 11oz sublimation blank, No. 7102.

Recommended settings for 11oz mugs

EquipmentMug press
Temperature190°C (374°F)
Time120–180 seconds

Treat these numbers as a starting point. Presses heat differently, and transfer paper and ink also play a part, so run one test mug, check the result and adjust the time within that range for your machine.

Mug press, oven or shrink wrap?

Our sublimation blanks work with all three: a mug press, a sublimation oven, or shrink wrap sleeves in an oven. Oven and shrink wrap times are different from press times and depend on the oven, so test first before running a batch.

Tip: when you print one design in quantity, keep those mugs in the part of your oven or press set-up where the temperature is the same, so the colour stays consistent across the run.

Common problems and how to fix them

ProblemUsual causeWhat to change
Faded or pale coloursTemperature too low or time too shortRaise the temperature or add time, within the recommended range
YellowingTemperature too high or time too longLower the temperature or shorten the time
Ghosting or blurred imageThe transfer paper moved during pressingFix the paper firmly to the mug before pressing
Bubbles or blotchy patchesMoisture in the paper or on the mugKeep transfer paper and mugs dry before printing

If you have checked all four and the problem stays, look at the blank itself: a mug that is out of round or not straight does not sit evenly in the press, and a pore in the glaze shows through as a mark. We cover this in how to choose sublimation mug blanks.

Test our blanks on your own press

Our 11oz standard white sublimation mug is always in stock. The minimum order is 1,000 pieces, and you can order one carton of 36 mugs first to test them on your own equipment. Other sizes and colours are on our sublimation mugs page.

Related guides